Vccandbank.com

Connecting a Wavlink AC2100 extender is the process of establishing a connection between the extender and a primary router, allowing the extender to extend the wireless network coverage of the primary router. This is typically done by plugging the extender into a power outlet near the router, pressing the WPS button on the extender and the router, and configuring the extender’s settings through a web interface accessed through a web browser. This process allows devices to connect to the extender’s network and access the internet through the primary router.

To connect a Wavlink AC2100 extender follow these steps:

1. Connect the extender to an electrical socket close to your router.
2. Press and hold the WPS button on the extender for 5 seconds.
3. Press the WPS button on your router.
4. Wait for the extender’s LED light to turn solid green, indicating a successful connection.
5. Connect your device to the extender’s wireless network, the network name (SSID) should be the same as your router’s with “_EXT” added to the end of it.
6. Open a web browser and enter(192.168.10.1) into the address bar.
7. Enter the login credentials (username and password) for the extender.
8. Go to the settings menu and configure the extender to your preferences.

Note: If your router does not have a WPS button, you can connect to the extender’s network manually by searching for wireless networks and selecting the extender’s network. Then, enter the login credentials.

There are two ways to connect a Wavlink ac2100 extender:

•  WPS method
•  Manual Method

Setting up a Wavlink AC2100 extender with the WPS button

To set up a Wavlink AC2100 extender using the WPS (Wi-Fi Protected Setup) button, follow these steps:

1. Press and hold the WPS button on the extender for at least 5 seconds, until the WPS LED starts flashing.
2. Press the WPS button on your router. The WPS LED on the extender should stop flashing and stay lit, indicating that the connection has been established.
3. If your router does not have a WPS button, you can connect to the extender’s wireless network (the network name (SSID) should be on the label of the extender) and use a web browser to access the extender’s web-based setup page.
4. Once connected, you can configure the extender by following the on-screen instructions.
5. Once the extender is configured, you should be able to connect to your extended wireless network and enjoy the increased coverage.

The Wavlink AC2100 setup with WPS is finally finished. Please call or chat with us if you have any questions about your Wavlink extender.

Wavlink AC2100 Extender Manual Setup

To manually set up a Wavlink AC2100 extender, follow these steps:

1. Plug the extender into an electrical outlet and wait for it to power on.
2. Connect your device (computer, smartphone, etc.) to the extender’s wireless network. The network name (SSID) and password should be on the label of the extender.
3. Once connected, open a web browser and enter the extender’s IP address (192.168.10.1) in the address bar. If the IP address doesn’t work, you can check the extender’s manual or online documentation to find the correct IP address.
4. Log in to the extender’s web-based setup page using the default username and password (usually “admin” for both).
5. In the setup page, click on “Repeater” or “Extender” mode, then click on “Scan” to search for available wireless networks.
6. Select the network you want to extend and enter the password for that network.
7. Click on “Apply” or “Save” to complete the setup process.
8. Once the extender is configured, you should be able to connect to your extended wireless network and enjoy the increased coverage.

Note: The setup process may vary slightly depending on the specific model of the Wavlink AC2100 extender you are using. It is recommended to refer to the manual or the manufacturer’s website for specific instructions.

Wavlink AC2100 Extender Firmware Update

Here are the steps for Wavlink AC1200 Extender Firmware Update :

1. Connect your device (computer, smartphone, etc.) to the extender’s wireless network. The network name (SSID) and password should be on the label of the extender.
2. Once connected, open a web browser and enter the Wavlink Extender Default  IP address (192.168.10.1) in the address bar. If the IP address doesn’t work, you can check the extender’s manual or online documentation to find the correct IP address.
3. Log in to the extender’s web-based setup page using the default username and password (usually “admin” for both).
4. Go to the firmware update page, if available.
5. Check if there is any new firmware available. If there is, download the firmware file and save it to your computer.
6. Follow the instructions to upload the firmware file to the extender.
7. Wait for the extender to update the firmware. This process may take several minutes.
8. Once the firmware update is complete, the extender will reboot.

Note: It is important to make sure that you are connected to the Internet and that your device has enough battery or power source before starting the firmware update process. It is also important to read the release notes for the firmware update before proceeding to update, as it could contain important information about new features, bug fixes and compatibility issues.

Wavlink AC2100 Extender Factory Reset process

To factory reset a Wavlink AC2100 extender, follow these steps:

1. Locate the reset button on the extender, usually it’s a small button located at the back of the device.
2. Use a small pin or paperclip to press and hold the reset button for at least 10 seconds, until the LED lights on the extender start flashing.
3. Release the reset button and wait for the extender to reboot.
4. Once the extender has rebooted, it will be restored to its factory settings.

Note: Factory resetting the extender will erase all of the configurations you have made, including your wireless network name (SSID) and password. You will have to set it up again from scratch after factory reset. It’s also recommended to check the manual or the manufacturer’s website for specific instructions, as the process may vary slightly depending on the specific model of the Wavlink AC2100 extender you are using.